4 Carpet Cleaning Methods: Advantages and Disadvantages 

» Posted by on Dec 29, 2017 in Carpet Cleaning Methods | Comments Off on 4 Carpet Cleaning Methods: Advantages and Disadvantages 

Our carpets deserve to be professionally cleaned once in a while. Regular vacuum can get the everyday dust and dirt of the carpets but a professional cleaning method will extract the pollutants and allergens that lurk deep within the fibers. There are four known carpet cleaning method, each of them has advantages and disadvantages.  

Carpet Cleaning Methods 

Choosing a particular cleaning method for your carpet will take time because you have to consider a lot of things. The methods are identified into two categories: dry cleaning and wet cleaning. Read the following to distinguish each method so you can decide what the best method is for you carpet.  

Dry Cleaning with Absorbent Compound 

Dry cleaning method is the traditional method of carpet cleaning. It uses powder mixed with special cleaning agents and solvents then spread over the carpet. A machine with counter-rotating business is then used to clean the carpet, which allows the powder to absorb into the fibers. After 15 minutes of letting the powder sit on the carpet, it’s vacuumed up.  

One of the advantages of this method is that it is a simple one that even a normal homeowner can do. It dries fast, and after 20 minutes your carpet would be functional and used again. However, after many clean-ups using this system, the powder is trapped and builds up over time. It can’t do deep cleaning, and will cause excessive dust build-up in the house.  

Dry Foam Method 

This process involves applying a cleaning agent to the carpet to suspend debris and dirt, and then foam is whipped. With the use of a machine with rotating brushes, it will work its way into the fibers. After a while, a vacuum is used to extract the foam. If you want a fast, simple and inexpensive way to clean the carpet, this method is for you. However, it cannot thoroughly extract the soil below the carpet’s surface. Machine malfunction can happen anytime, and it will cause excessive wetting in your carpet.  

Wet Cleaning 

This method is also known as steam cleaning or hot water extraction which is offered by Carpet cleaning Roanoke, TX. The carpet is pre-conditioned first with chemicals that liquefy oil-based substances and oil present in the fibers of the carpets. The water is then heated and pressurized and injected in the carpet. After 15 minutes, a vacuum is used to extract the solution from the carpet.  

This method is now popular because of its effectivity. It gets the pollutants deep down from the carpet which eliminates the growth of molds, mildew and other allergens. Because of its efficiency, the method can be costly.  

Cleaning with Absorbent Pad 

Another cleaning method is known as bonnet cleaning, which is used during light carpet maintenance. The carpet is vacuumed, a chemical solution is sprayed using a sprayer and then the solution sits on the carpet for the suitable reaction time. A bonnet or absorbent pad is placed on the floor machine’s drive block and spun all over the carpet. It will impregnate the carpet fibers with the solution. This is an easy method and inexpensive too. However, it doesn’t reach down into the fibers.